TUF SHINE Tire Clearcoat

 
tire clearcoat TUF SHINE Tire Clearcoat

TUF SHINE Tire Clearcoat 6 oz Bottle – $24.99

Includes 1 applicator sponge

 

TUF SHINE Tire Clearcoat – NEW! HIGH TECH POLYMER FORMULA

6 oz. – (enough to coat approximately 20 passenger tires, 2 coats each)
First time users should purchase the TUF SHINE Tire Appearance Kit with the Tire Cleaner included.

This revolutionary tire dressing will outperform any other tire dressing you have ever used. The water-based formula contains NO silicones or oils, and provides a shine that will last for several months. TUF SHINE Tire Clearcoat dries to the touch in just seconds and will not crack. If you are tired of using "run of the mill" tire dressings that leave an oily, sticky residue and attracts dust and dirt, then this is the product for you.

TUF SHINE Tire Clearcoat is the complete opposite. It seals the rubber and keeps factory lubricants from escaping. It has anti-static properties that repel dust, dirt and water. The superior UV and ozone protection provided by TUF SHINE Tire Clearcoat adds to the longevity of the sidewalls.

TUF SHINE Tire Clearcoat will coat and seal whitewalls and raised white lettering to keep them looking bright and white. This remarkable tire finish will not "brown," there is no "spin-off" or residue of any kind, and it will withstand repeated pressure washings. Perfect for rubber floor mats as well. Just clean surfaces with TUF SHINE Tire Cleaner and apply TUF SHINE Tire Clearcoat to restore mats to a "better than new" appearance.

* For best results, TUF SHINE Tire Cleaner is required before the TUF SHINE Tire Clearcoat.

TUF SHINE Tire Clearcoat Features

Competitive products are designed to lubricate the rubber. This lubrication washes off or evaporates over time. When this happens, protection is lost and it’s then necessary to repeatedly apply dressings to maintain the desired shine and protection.

To maintain a “Wet” look with other product you would have to constantly clean and apply dressings. Heavy-duty cleaners are required to remove the residue build-up left behind by most silicone-based dressings. Constant cleaning with harsh chemicals can remove factory lubricants that are built into the tire’s sidewalls and cause oxidation and dry cracks to appear. These same cleaners, when used regularly, can potentially ruin the finish on expensive wheels.

TUF SHINE has taken a different approach—the opposite to that of our competitors.

  • Perfect for autos, trucks, cycles, RV’s, trailers, ATV’s and more
  • Lasts for months & months & months
  • Withstands repeated high-pressure washings
  • Seals in factory lubricants and blocks out UV and ozone so tires stay pliable
  • Contains NO OILS or SILICONE that can cause dirt and dust to cling to tires
  • NO SLING OFF! This usually occurs with other “WET” look tire dressings
  • Anti-static. Since dust won’t cling to TUF Shine, you can now dust your tires!
  • You control the shine. The more coats, the more shine
  • Gives tires a deep black “WET” look, which enhances the cars appearance
  • Water based for easy cleanup
  • Will greatly outlast most oil and water based silicone tire dressings
  • Adds a permanent shine to old, dull looking tires
  • With TUF SHINE, the tire cleaner (provided) is a first time only cleaning/prep
  • Once the clearcoat is applied, maintaining the shine is easy. Wash tires with mild soap and water and a soft car wash brush. A much safer way to clean tires
  • Tires will not brown, which is usually caused by dirt clinging to the oily residue left behind by other dressings
  • Seals whitewalls and white lettering to prevent road grime from turning white areas brown or gray
  • A little goes a long way. A 6 oz. bottle will treat approx. 20 passenger tires, 2 coats each
  • Sidewalls will stay looking like new when properly maintained

TIRE CLEARCOAT INSTRUCTIONS – Applying TUF SHINE Tire Clearcoat / Tire Shine

  1. Shake contents. 
  2. Tire must be cool and dry. DO NOT APPLY IN DIRECT SUNLIGHT, OR IN COLD TEMPERATURES BELOW 5O DEGREES.
  3. Squirt a small amount onto the applicator sponge. 
  4. Apply to whitewalls and raised letters first. Allow 5 or more minutes for the first coat to dry, which will seal the white areas. 
  5. Apply a thin even coat to the rest of the tire following the circular pattern of the tire. Slight milky buildup is OK, smooth any runs. The tire shine will dry clear. If any black residue is drawn onto white areas, wipe off immediately with a clean damp towel. Allow to dry between coats. Liberal applications for 2nd and 3rd coats will enhance tire shine. 
  6. TUF SHINE Tire Clearcoat is permanent, unlike other tire shine products. Wipe any residue from wheels and/or painted surfaces before it dries. Apply additional coats for increased tire shine. 3 to 4 coats will bring out the maximum shine. Touch up scuffmarks and nicks to restore the tire shine and keep that new look. 
  7. Rinse the applicator sponge with water for future use. 
  8. Care for the tire as you would the paint. To prolong the finish, use clear water and a soft brush or mild soap and water for heavier dirt and mud. Avoid using heavy chemical cleaners as they will dull the tire shine finish.

    Re-apply TUF SHINE Tire Clearcoat as needed to maintain tire shine.

Technical Information

  • Independently tested for long term durability
  • Prolongs the life of the sidewall by sealing in factory rubber lubricants
  • Blocks out damaging ozone & UV rays
  • Over 500% elasticity. Coating flexes with the tire
  • Coating will not crack under normal conditions
  • Environmentally safe – Very low VOC rating
  • No silicone additives
  • Water based formula, no harmful petroleum solvents