TUF SHINE Black Restore

 
black restore TUF SHINE Black Restore

TUF SHINE BLACK RESTORE ™ – $19.99

6 oz. – Includes 1 applicator sponge and one set nitrile gloves

 

TUF SHINE Black Restore is a unique NEW product used to restore faded/oxidized tires and black exterior trim. It will permanently revitalize older, weathered looking surfaces. Apply it with the sponge applicator (included) and watch those surfaces go from dull to new with very little effort.

Here are some before and after shots of a golf cart restored with Black Restore:

Unlike other products, it will not wash off, even when pressure washed. A water-based product that dries quickly with no oily residue and clean up is a breeze. Works on most hard plastic and rubber surfaces. Can also be used on tires to give them a deep black look and added UV protection. Apply additional coats to achieve deeper color. For additional protection and a glossy shine, topcoat with TUF SHINE Tire Clearcoat. * For best results, TUF SHINE Tire Cleaner is required before applying the TUF SHINE Black Restore.

TUF SHINE Black Restore Features

  • Water based formula dries absolutely dry to the touch in minutes
  • Contains no oils or silicones
  • No harmful petroleum solvents
  • Withstands repeated pressure washings
  • Anti-static. Dust won’t cling to surface
  • Revitalizes faded and oxidized tires, rubber floor mats, black plastic trim, vinyl tops, leather and most hard rubber and plastic surfaces
  • Coating lasts for months & months.
  • Water based for easy clean up. 
    ***DO NOT USE WHERE WATER POOLS ON SURFACE***

TUF SHINE Black Restore Instructions

Prior to using TUF SHINE BLACK RESTORE, the surface MUST be clean and free of ANY silicone residue. Failure to properly clean the surface will result in adhesion failure. It is recommended that TUF SHINE Tire Cleaner be used as it is specially formulated to remove silicone. TUF SHINE BLACK RESTORE is water based and will not stick to silicone.
TUF SHINE BLACK RESTORE contains no silicones or solvents
 
Proper surface preparation is the key to success. For heavily soiled surfaces, use a stiff bristle brush for a more aggressive scrub. Rinse well and allow to dry before applying TUF SHINE BLACK RESTORE.

TUF SHINE BLACK RESTORE contains special colorants which are NOT in suspension. SHAKE the container well and often during use to prevent settling of colorant.

BULK PURCHASES:

If purchasing in bulk, we recommend shaking contents well and pouring product into smaller bottles for dispensing.

Once the surface is clean, TUF SHINE BLACK RESTORE may be applied with a foam paint brush or the applicator sponge included. WEAR WATERPROOF GLOVES to protect hands from staining.   Rinse sponge after use with clean water for future use.

Once dry, apply a minimum of two coats of the TUF SHINE Tire Clearcoat for added shine and UV protection. The finished surface will now withstand repeated pressure washings and retain a clean appearance for an extended period of time. Re-apply as needed.

GOLF CARTS

TUF SHINE BLACK RESTORE will revitalize faded and oxidized gray and black panels, cup holders, floor mats, tires, etc. Additional coats may be necessary, depending on the condition of the surface. Two to three coats are usually sufficient.

CAUTION: Liquid consistency is very thin, and could easily spill. Set opened bottle on waterproof pad to protect floors and driveways. Keep a wet rag handy, as spills dry very quickly.